tc rear sway bar

20PSI TX · tinkerer Joined: 23 Oct 2001 Posts: 475

I have been looking at putting an adjustable sway bar in my TC but my car dont have mounts for it. i have a TG just sitting at home that im wrecking at the moment and was wondering if I just cut the mounts off the bottom of the car and just welded it onto my car would this do the trick or is there an easier way. Has anyone done this before?

CHEERS
JOSH

Adam · Site Admin Joined: 04 Oct 2001 Posts: 682

Yep, been done before on gemini series cars, fairly straigt-forward to do... although may I make a suggestion, also put a plate on the underside of the floorpan to spread the load as the factory rear swaybar mount has been known to fail.

Alternatively you could just entirely custom make the mount to the same dimension as the factory item, grab yourself some appropriate nuts, some decently thick steel plate, an angle grinder, mig welder and bob is your uncle.

Lobo · newbie Joined: 02 Oct 2002 Posts: 1

yeah i been interested in putting some on my te but havent really looked into it much...any info?

TXcoupe · petrol head Joined: 05 Oct 2001 Posts: 1675

my TX has a aftermarket kit on the rear doesnt look to flash but apparently it does the job

20PSI TX · tinkerer Joined: 23 Oct 2001 Posts: 475

whats this after market kit who makes it?

CHEERS
JOSH

20PSI TX · tinkerer Joined: 23 Oct 2001 Posts: 475

cheers for the info

actualy bill is my uncle

JOSH

TXcoupe · petrol head Joined: 05 Oct 2001 Posts: 1675

i think whiteline do