Quick Question I think!!

Pervert · backyard mechanic Joined: 09 Mar 2002 Posts: 527

Just a few questions b4 i start rippin my 1600 out and putting the G200 in.
1. Do parts of a G161 fit onto a g200?? eg. Starter motor?
2. Can i do this swap over the weekend? remembering i have no experience in doing this.
3. Seeing as i have never done this, What sorts of tools will i need?
4. Does a Single Side draft Weber go on the G200 easy? I've heard that the G200 sits higher then the G161 is this right?
5. Anyone got a good engine crane i can borrow for a weekend or so?
sorry about all the questions, any help would be great, thanx guys.
Ps. I'm in melb if anyone wants to come down and lend me a hand.
cheers steve.

Stoktg · tinkerer Joined: 05 Jan 2002 Posts: 113

1. Yes.
2. Yes. Could knock it off in half a day if you want
3. Nothing special. Just a few screw drivers, spanners and sockets mostly 12,14,17mm.
4. Slightly but you still may have to run a remote resivour depending on the manifold.
5. I wish.

Corty · tinkerer Joined: 01 Nov 2001 Posts: 126

Steve,

Did you get a remote resvior booster/mastercyclinder set up ???

I've got one in Sydney for $100 complete with lines to the porportioning valve.

I can send it COD if you need it

Matt

Pervert · backyard mechanic Joined: 09 Mar 2002 Posts: 527

What does the Remote resvior look like? does it have just one filler? Have ya got a pic of it or anything? cuz my uncle works at PBR and can get me most of this stuff brand new, for real real cheap. I just don't know what they look like or anything about em.
cheers.

Corty · tinkerer Joined: 01 Nov 2001 Posts: 126

rather than having the resviour where the fuild goes in mounted to the mastercyclinder it attached to the cyclinder by to hoses and it the resivour bolts to the innerguard