| View previous topic :: View next topic |
| Author |
Message |
Stock TE
backyard mechanic
Joined: 12 Mar 2002
Posts: 853
|
 Posted: Wed Nov 13, 2002 10:30 pm Post subject: Discs |
 |
|
| Does the hole in the centre of the disc need to be 68mm, because DBA disc 425U measures Diam.=276mm and thick.=24mm Height=45mm but the centre hole is 69mm. Is this a problem? Any help would be good. Thanks. |
|
| Back to top |
|
 |
ByteMe22
backyard mechanic
Joined: 28 Dec 2001
Posts: 591
|
| Posted: Thu Nov 14, 2002 9:52 am Post subject: Re: Discs |
|
|
| im not sure about the center hole but i did notice that u are getting them undrilled.... if its because they a 5 stud they do have the dba 221 off an eairlyer magna that is same dimentions except it is 266mm but it is 4 stud... |
|
| Back to top |
|
|
Stock TE
backyard mechanic
Joined: 12 Mar 2002
Posts: 853
|
| Posted: Thu Nov 14, 2002 2:47 pm Post subject: Re: Discs, also ATTN Adam |
|
|
Yes I want to get them undrilled because they are 5 stud, but I want to go really big for the same reasons as Adam.
Adam, if going down on thickness 2mm and having the centre hole 1mm bigger is alright you could go for DBA no. 213 which is 296mm in diameter, 30mm thick, 69mm centre hole, and only 45.2 mm high which is 1.8mm shorter than the standard Gemini calliper. |
|
| Back to top |
|
|
|
