View previous topic :: View next topic |
Author |
Message |
Nick_H tinkerer
Joined: 12 Oct 2001 Posts: 76
|
Posted: Fri Oct 18, 2002 9:35 pm Post subject: EFI Microtech mt4 |
|
|
Had anyone had anything to do with a or own microtech MT4 efi computer.. just bought one and going to put it on next weekend. like to know if there was any problems when installing. im planing to do the hole job in a afternoon.
Nick |
|
Back to top |
|
|
FJ20DET tinkerer
Joined: 06 Oct 2002 Posts: 191
|
Posted: Fri Oct 18, 2002 9:38 pm Post subject: Re: EFI Microtech mt4 |
|
|
hope u know a bit about wiring then lol im leaving mine to redcliff dyno.
but from what ui have heard it will take a 1st timer a whole day or 2 to get the whole job done.
are u gonna get it dyno tuned? or just a hit and miss tune?
cheers |
|
Back to top |
|
|
Nick_H tinkerer
Joined: 12 Oct 2001 Posts: 76
|
Posted: Fri Oct 18, 2002 10:30 pm Post subject: Re: EFI Microtech mt4 |
|
|
lucky for me i know the wiring took about two hours to position the wires and tape the loom came to a total of 8 legs (only name i could think of)injectors,TPS,coolent temp,coil/dissy,batt,earth,oyxgen sensor,fuel pumps..
umm its going to be a hit and miss tune.thats the only hard bit i think ill have. i am hoping someone else has done it before that may have some secrets. |
|
Back to top |
|
|
Soop backyard mechanic
Joined: 30 May 2002 Posts: 748
|
Posted: Sat Oct 19, 2002 2:19 pm Post subject: Re: EFI Microtech mt4 |
|
|
I'm not sure but I think that computer comes with a fuel map for the isuzu twin cam engines.
So if you running a twincam it should be relatively easy to get it up and running sweet.
I've just ripped out my crap delco system and should be getting one of these soon. |
|
Back to top |
|
|
RedTG tinkerer
Joined: 04 Feb 2002 Posts: 136
|
Posted: Sat Oct 19, 2002 2:46 pm Post subject: MT4 wiring |
|
|
haha,
Gettin them to do the wiring?? forget that
good ol "flog on"
and i bet he charges the world to get that stuff installed
good luck though |
|
Back to top |
|
|
CyBeR GeM tinkerer
Joined: 03 Aug 2002 Posts: 181
|
Posted: Sat Oct 19, 2002 2:56 pm Post subject: Re: MT4 wiring |
|
|
redTG Mr know it all hehe. hay carlos *waves |
|
Back to top |
|
|
martin backyard mechanic
Joined: 04 Oct 2001 Posts: 900
|
Posted: Sat Oct 19, 2002 4:41 pm Post subject: Re: EFI Microtech mt4 |
|
|
soop: anyway of finding that out for sure???
cause if they do i'll buy one tomorrow
1.8l and 2.0l ??? |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Sat Oct 19, 2002 5:43 pm Post subject: Re: EFI Microtech mt4 |
|
|
I have an MTX8, which is very similar, but installing it in one day, thats a bit optimistic.
It might take a couple of days, depends on the quality of the install though.
BTW, you can do a rough tune with a narrow band oxy sensor on the highway.
Ben Wight |
|
Back to top |
|
|
RedTG tinkerer
Joined: 04 Feb 2002 Posts: 136
|
Posted: Sun Oct 20, 2002 5:12 pm Post subject: "RedTG officially banned" |
|
|
Defamatory lies have no place on this forum redTG.
Steve, the IP he posted from was 202.138.40.77 if that happens to be of any use should you pursue legal action. |
|
Back to top |
|
|
FJ20DET tinkerer
Joined: 06 Oct 2002 Posts: 191
|
Posted: Sun Oct 20, 2002 9:29 pm Post subject: ????????????????? |
|
|
i just asked him and he said there goin well, and there not bankrupt |
|
Back to top |
|
|
dynosteve newbie
Joined: 20 Oct 2002 Posts: 3
|
Posted: Mon Oct 21, 2002 12:52 am Post subject: Subject removed by administrator |
|
|
Don't know where you get your so called information redtg but you obviously have your head up your arse, and can't see the real world for shit. For the record putting things like your post out in a public domain for all to see can have you sued. And yes i have copied this post for record.
And to set the record straight for everyone else we are travelling very well.(except for in this other guys mind) |
|
Back to top |
|
|
Soop backyard mechanic
Joined: 30 May 2002 Posts: 748
|
Posted: Mon Oct 21, 2002 3:49 am Post subject: Re: EFI Microtech mt4 |
|
|
Well the guy that will be installing mine said had previously done one on another gem with a twincam and yes it did have a fuel map for those engines.
I don't think he even had to tune it after install, just load the program, turn the key and it was running sweet.
I'm definetaly getting one, just need the cash
Yes, 1.8 and 2.0 I'd ASSUME.. but it would be worth checking to be 100% sure. |
|
Back to top |
|
|
dynosteve newbie
Joined: 20 Oct 2002 Posts: 3
|
Posted: Mon Oct 21, 2002 9:25 am Post subject: Re: "RedTG officially banned" |
|
|
Thanks very much, |
|
Back to top |
|
|
FJ20DET tinkerer
Joined: 06 Oct 2002 Posts: 191
|
Posted: Mon Oct 21, 2002 12:28 pm Post subject: Re: Subject removed by administrator |
|
|
:S |
|
Back to top |
|
|
Nick_H tinkerer
Joined: 12 Oct 2001 Posts: 76
|
Posted: Mon Oct 21, 2002 3:27 pm Post subject: Re: EFI Microtech mt4 |
|
|
the mt4 is very simple.....ive installed every thing in the car just have to put on the injection manifold and plug in the injectors.mt4 has no timing functions only injectors,temp,air temp,oxygen,fuel pump,TPS,and battery connection.took me 2 hours to setup and tape the loom and about 3 hours to run through the car and install the primer pump,swerl tank and efi pump.maybe another 3 to 4 hours to fit the manifold and crossover pipe (turbo). dont know how long it will take to tune..... |
|
Back to top |
|
|
|