| View previous topic :: View next topic |
| Author |
Message |
NUT161
tinkerer
Joined: 30 Dec 2001
Posts: 225
|
 Posted: Tue Jan 22, 2002 5:48 pm Post subject: Weber jets? |
 |
|
hi all, i recently bought a 34/34 weber and need to know what size jets i need to jet the weber down to, also where i can get them.
thanks |
|
| Back to top |
|
 |
Ben Wight
backyard mechanic
Joined: 04 Oct 2001
Posts: 946
|
| Posted: Wed Jan 23, 2002 2:50 am Post subject: Re: Weber jets? |
|
|
Solder the jets up and drill them smaller, and then work up if they are too lean. They probably wont be far off, the jets are designed to meter the fuel for a range of airflow, you will simply be using the lower range of that airflow due to your engines smaller capacity.
Bolt it on and see how it runs.
Ben Wight |
|
| Back to top |
|
|
NUT161
tinkerer
Joined: 30 Dec 2001
Posts: 225
|
| Posted: Wed Jan 23, 2002 3:01 pm Post subject: Re: Weber jets? |
|
|
| thanks, i thought i would have to source out smaller ones. |
|
| Back to top |
|
|
Ben Wight
backyard mechanic
Joined: 04 Oct 2001
Posts: 946
|
| Posted: Fri Jan 25, 2002 3:43 am Post subject: Re: Weber jets? |
|
|
Soldering them is very easy, you just need some solder and some flux. And of course, some drill bits to re drill them. Do a few, and then you will wonder what the fuss is about.
Solder and flux can be bought in a little kit made by CIGWeld or someone like that, available from wherever you buy welding equipment.
Ben Wight |
|
| Back to top |
|
|
|
