| View previous topic :: View next topic |
| Author |
Message |
Mal
rice boy
Joined: 07 Oct 2001
Posts: 19
|
 Posted: Tue Dec 11, 2001 12:47 am Post subject: Holley set up... |
 |
|
Just wanting to know what sort of adaptor plate you use to put a holley on a standard manifold. I've heard of getting something off a sigma but if so what adaptor plate is it?
Any help would be appreciated to tell me what to get and how to put it together. thanx |
|
| Back to top |
|
 |
TXcoupe
petrol head
Joined: 05 Oct 2001
Posts: 1675
|
| Posted: Tue Dec 11, 2001 2:20 am Post subject: Re: Holley set up... |
|
|
| wat size holley??/ |
|
| Back to top |
|
|
Mal
rice boy
Joined: 07 Oct 2001
Posts: 19
|
| Posted: Tue Dec 11, 2001 4:57 pm Post subject: Re: Holley set up... |
|
|
| About a 320 or 350 holley. |
|
| Back to top |
|
|
Fastgem
tinkerer
Joined: 04 Oct 2001
Posts: 166
|
| Posted: Tue Dec 11, 2001 7:01 pm Post subject: Re: Holley set up... |
|
|
I just got a universal adaptor from repco for about $25, you just drill 4 holes in it to match it up to the gemini manifold. I had a shit load of those black plastic spacers, just use one of those to mark where the holes need to be drilled on the adaptor plate then i glued maybe 4 or 5 plastic spacers together so the accelerator pump can clear the thermostat housing, ground them out so there was a smooth transition between the holley adaptor and the manifold and it works pretty well.
If you have a remote reservoir (otherwise it gets in the way of the throttle linkage) then you can probably get away with mounting the holley back the front so you wont need to worry about the spacers. |
|
| Back to top |
|
|
|
