| View previous topic :: View next topic |
| Author |
Message |
Tweakin TE
rice boy
Joined: 15 Aug 2003
Posts: 22
|
 Posted: Sat Sep 13, 2003 12:35 pm Post subject: kick down cable |
 |
|
| hi guys. me and a mate adjusted the accelerator cable last night, but didn't know how to do the kick down one, or if was auto adjusting or not. can you help me out? thanks guys. |
|
| Back to top |
|
 |
HOP_A_LONG
tinkerer
Joined: 27 Aug 2003
Posts: 274
|
| Posted: Sun Sep 14, 2003 6:02 pm Post subject: Re: kick down cable |
|
|
1)disconnect the cable at the carb
2)pull the cable up untill you get to the point just before it engages
3)adjust so that the cable should slip easily in the carb linkage (no slack and you dont have to lift the cable further)
4)tighten locknuts
5)connect cable
6)check you have full throttle again
good luck
HOP-A-LONG |
|
| Back to top |
|
|
|
