| View previous topic :: View next topic |
| Author |
Message |
TravTC
tinkerer
Joined: 04 Oct 2001
Posts: 82
|
 Posted: Wed Jun 12, 2002 9:36 pm Post subject: Fender Removal??? |
 |
|
Heyas. Im having tonnes of trouble trying to get my TC fender/skirt off. It seems to have a few spot welds onto the chassis extensions, but also seems to have some bent in metal just above the parking lamps.
Is there an easy removal technique that im not doing? |
|
| Back to top |
|
 |
TravTC
tinkerer
Joined: 04 Oct 2001
Posts: 82
|
| Posted: Wed Jun 12, 2002 9:37 pm Post subject: Re: Fender Removal??? |
|
|
| Oh yeah, making sure that I dont f**K everything up for putting a new fender back on >;] |
|
| Back to top |
|
|
alan
tinkerer
Joined: 07 Apr 2002
Posts: 429
|
| Posted: Thu Jun 13, 2002 6:02 pm Post subject: Re: Fender Removal??? |
|
|
Spot welds? there is only one way to get it off. Undo all the 10mm bolts you can find.
theres 3 in the wheel well
and 2 inside behind the door kick trim. The rest are all visible. Lift it up and off. If it doesnt come, somehting is wrong. |
|
| Back to top |
|
|
Ben Wight
backyard mechanic
Joined: 04 Oct 2001
Posts: 946
|
| Posted: Thu Jun 13, 2002 8:51 pm Post subject: Re: Fender Removal??? |
|
|
A fender is the american term for front guard. it sounds like you are talking about the entire front panel, probably called a radiator support panel.
This is spot welded in a lot of places.
If you actually mean the guard, then there are only bolts holding it on, if you have found some welds, then they are not factory ones.
Ben Wight |
|
| Back to top |
|
|
|
