View previous topic :: View next topic |
Author |
Message |
cordial rice boy
Joined: 04 May 2002 Posts: 19
|
Posted: Tue May 07, 2002 1:58 pm Post subject: efi turbo sohc g-series in gemmi |
|
|
im considering building a g161 bored to 1800 with a g2oo head mitsubishi cordia efi system and a t28 turbo has any one attempted something simmilar or got any sugestions or experiances that may be helpful
if i bore a 1600 till the 1800 pistons fit will it be the same as an 1800 or does the 1800 have a longer stroke
chears. |
|
Back to top |
|
|
zzz petrol head
Joined: 16 Jan 2002 Posts: 1298
|
Posted: Tue May 07, 2002 2:04 pm Post subject: Re: efi turbo sohc g-series in gemmi |
|
|
it's called the search button at the top of the forum
cheers nik |
|
Back to top |
|
|
psi tinkerer
Joined: 17 Apr 2002 Posts: 123
|
Posted: Tue May 07, 2002 3:48 pm Post subject: Re: efi turbo sohc g-series in gemmi |
|
|
Hey cordial.
I have been looking into doing this for a while now and have ran into alot of hidden costs. i dont know if u know what is involved in converting it to e.f.i, but go to this site http://www.hotgemini.com./cgi-bin/workshop2.cgi?action=rt&tip_id=79 and look what is involved . then consider changing compression, building a strong bottom end, what computer u r gonna use, and what manifolds etc. Just letting you know what is involve to get it set up first.
As for what size motor to use, i havent got that far. Anyone else have any ideas for this sort of set up??
Thanx for any help |
|
Back to top |
|
|
cordial rice boy
Joined: 04 May 2002 Posts: 19
|
Posted: Tue May 07, 2002 5:22 pm Post subject: Re: efi turbo sohc g-series in gemmi |
|
|
thanks man,
i already have a cordia throttle body and computor, i think i can adapt the throttle body to a gemmi manifold by making a similar plate to the one used for fitting a webber. but these systems are only good for about 9-11 pound on the factory 1800 motor |
|
Back to top |
|
|
|