| View previous topic :: View next topic |
| Author |
Message |
tim hill
rice boy
Joined: 23 Oct 2001
Posts: 44
|
 Posted: Wed Mar 13, 2002 6:04 pm Post subject: g200/g161??? |
 |
|
do g200 sohc's have the same cam chain tentioner as a g161?
" " engine mounts?
im putting on into my car and the engine mounts are shit faced and i cant see any cam chain tentioners.
someone help me please! |
|
| Back to top |
|
 |
Fastgem
tinkerer
Joined: 04 Oct 2001
Posts: 166
|
| Posted: Wed Mar 13, 2002 7:57 pm Post subject: Re: g200/g161??? |
|
|
| Its there but its a shit of a thing. Its on the left hand side on the timing chain, There is a small black leaver sticking out the top of it, you need to use a screwdriver and flick it to the left to release the tension |
|
| Back to top |
|
|
rob_w
tinkerer
Joined: 19 Feb 2002
Posts: 395
|
| Posted: Thu Mar 14, 2002 1:15 am Post subject: Re: g200/g161??? |
|
|
i thought the g200 sohc used tha same block as the g161z sohc.....therefore, wouldn't the tensioners be the same too??
just a thought.
rob. |
|
| Back to top |
|
|
GasGem
backyard mechanic
Joined: 05 Nov 2001
Posts: 755
|
| Posted: Thu Mar 14, 2002 3:06 pm Post subject: Re: g200/g161??? |
|
|
G200's have a different tensioner to G161's and it has a different release mech, it's not plastic like the G161's,
also the G200 block is a little bit taller ie the top of the water pump is not flush with the top of the block there is about 5 mm diff,
cheers
Eggy |
|
| Back to top |
|
|
|
