WTB: Piazza turbo TPS sensor

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

Hey all,

I am chasing the TPS from a piazza turbo EFI manifold. I would also like to grab the black rubber boot that connects the twin butterfly throttle body to the factory crossover pipe.

If anyone has these, could you give me an email at wight@giant.net.au

otherwise, I have a complete EFI manifold (minus those parts above) that I cant use, and may as well sell. Maybe $150.

Ben Wight

Loz · backyard mechanic Joined: 05 Oct 2001 Posts: 943

I tried so hard to find the rubber boot thing, but either noone has them, or they dont want to seperate them form the efi setup. So good luck, I hope you have more luck than I did. I ended up using a high pressure rubber reducer, as the diameter is close enough to 3" that it will fit, and will usually conform to the irregular shape the TB is.

As for the sensor, Im pretty sure it is the same as the ones on a few other engines. FJ20, some early camiras, and a some others, so you could poach it from one of these.

Loz

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

Im not sure will help, but on the TPS on my twin cam (the throttle bodies look the same, so I dont see why these would be different) it has A22-000550 with the letters JECS just below it. Like I said I dont know if this will help but I hope it does.

TURBOY · tinkerer Joined: 13 Aug 2003 Posts: 112

thers a couple of engines that have the same boot rubber injected rodeos and camiras have the same rubber and the tps switch