clock > tacho

stock gem · tinkerer Joined: 09 Oct 2003 Posts: 130

i have a TG SL and in the dash its got the clock (analogue) on the left and speedo on the right. i saw a gemi TG that had a revmeter where my clock is. so how do i get a dash like that and is it hard to install?

GROOV3 · petrol head Joined: 04 Oct 2001 Posts: 3682

its a straight swap
its called a tacho dash you will pay more than $120 for one unless you manage to find one at a wreakers

only thing that i think you need to change is the wiring for the
lot meter and oil pressure though i may be wrong

Racegem · backyard mechanic Joined: 30 Jan 2002 Posts: 987

You'll need an oil pressure sender and a 'T' piece to suit. The oil pressure sender wire is taped to the loom that the oil light wire and temp sender wire are on. This gives you both guage and light. The VOLT meter wiring is already part of the loom and works no problem.

Yonnee

Wfc · tinkerer Joined: 30 Apr 2003 Posts: 158

i will buy your clock dash off you if you plan on selling it once you get your tacho dash
email me
wfc@netspace.net.au

cheers
WFC