| View previous topic :: View next topic |
| Author |
Message |
Josh
backyard mechanic
Joined: 04 Oct 2001
Posts: 602
|
 Posted: Fri Nov 07, 2003 2:41 pm Post subject: First time down the 1/4 |
 |
|
| I ran a 16.6 first time ever down the 1/4 mile on wednesday nite with my 16" rims... I gotta put my cam and new carby on now and run my 13" and see what I can do =)I wooped a manual VL with LSD =) |
|
| Back to top |
|
 |
ONLYA4
petrol head
Joined: 12 May 2003
Posts: 1114
|
| Posted: Fri Nov 07, 2003 2:49 pm Post subject: Re: First time down the 1/4 |
|
|
| What you running? |
|
| Back to top |
|
|
Josh
backyard mechanic
Joined: 04 Oct 2001
Posts: 602
|
| Posted: Fri Nov 07, 2003 11:25 pm Post subject: Re: First time down the 1/4 |
|
|
| G180 bored out 60 thou, balanced bottom end, rods resized and crank reground and polished but the head is just a stock big valve head with a stage 2 crow cam which has a fucked lobe and keeps eating rockers and the carby is a shitty 180, shit points and the cam is running way out of timing So i have heaps of things to fuck around with... |
|
| Back to top |
|
|
TDFlaredCoupe
tinkerer
Joined: 23 Dec 2002
Posts: 60
|
| Posted: Fri Nov 07, 2003 11:47 pm Post subject: Re: First time down the 1/4 |
|
|
| hey thats not to bad. mine ran a 16.1 with g161 30/70 cam and 350 holley accell coil thats it bottom end stock head had home job port not very big but. |
|
| Back to top |
|
|
|
