| View previous topic :: View next topic |
| Author |
Message |
Benjamin
backyard mechanic
Joined: 05 Oct 2001
Posts: 525
|
 Posted: Mon Oct 13, 2003 7:16 pm Post subject: Fitting 34ADM on 32/36 adapter |
 |
|
I have a freshly cleaned and prepped 34ADM sitting in my shed, ready to be plonked on a warm G200. Now, the 34ADM will fit on the 32/36 adapter, however the 34ADM has half an inch of extra height on the baseplate. What gives? I am assuming there isn't a 34ADM adapter to Gemini.
I had a local engineering joint lop the head off a suitable bolt for a longer stud, however this is different. The studs closest to the cylinder head are situated in the adapter differently. Oh, it is your standard redline adapter.
Thanx |
|
| Back to top |
|
 |
Blue TG
tinkerer
Joined: 10 Feb 2003
Posts: 183
|
| Posted: Mon Oct 13, 2003 8:51 pm Post subject: Re: Fitting 34ADM on 32/36 adapter |
|
|
| i just got one on, i sued longer studs that i got from under my house in a bottle labelled gem manifold studs |
|
| Back to top |
|
|
Josh
backyard mechanic
Joined: 04 Oct 2001
Posts: 602
|
|
| Back to top |
|
|
|
