Weber bolt on kits

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

Hey all, just re-advertising!

I have a heap of carbs to sell, and can supply the following. All are cleaned and partially reconditioned. A full reco involves all new bits, and rebsuhed throttle shafts, etc. Well I dont rebush shafts, and if a carb was that knackered, I wouldn't sell it. Just new gaskets and diaphragms where needed, and a complete clean out of all passages, etc.

DOWNDRAUGHT WEBERS (all share same stud pattern as 32/36, and can be bolted onto standard inlet manifold with adaptor plate)

34 ADM (mechancial secondaries) from XE/XF falcon - $85

32/36 DGV (mechancial secondaries) off 2 litre escort - $85

also 1 x Holley 350cfm (not same as weber)

SIDEDRAUGHT CARBS (all share same DCOE stud patter, no manifolds included, I dont have any!)

2 x 40mm Dellorto side draughts, DHLA straight off alfa, - $300 inlc. factory airbox.

1 x Solex 40mm side draught - $65 (i've never used this carb but looks good, (looks same as weber)

1 x Weber 45mm DCOE side draught - $180

I also can put together a complete bolt on kits for the weber downdraughts, with everything needed, even including ported inlet manifolds as per my website, if wanted.

www.giant.net.au/users/wight

Manifolds are $110, (TX ones are $130 as has bigger ports)

Adaptor plates with throttle brackets are $50 (assuming adaptor plates still cost $40) - to suit down draught webers.

If anyone is keen, let me know, preferably by email (but I will check this periodically). Let me know what you want/need, and we can discuss what would be good for your combo and what I can supply.

Ben Wight

Custom · tinkerer Joined: 27 Mar 2003 Posts: 63

Hi Ben,
I had a quick peek at your site and it seems you might be able to help me out here.
I have a worked 2.0ltr in a TG with all the bits, Port, Polish, cam, extractors, exhaust, etc, etc... but at the moment I am running the standard Nikki and would like to go single or twin Webber depending on $$$.
A mate used to have a 2.3ltr worked with twin side draughts and this thing used to blow WRX's away with not too much worries, I want something of the same output.
btw... his gemi was red and had the plates: "WILDTX" it was an absulute beast af a Gem!
Anyways, try to come up with a combo for me and a rough price, also keeping in mind that I don't want to tow a service station behind me (fuel prices are too fucked at the moment)
Also, if you think I would need a manifold to suit the Webbers, thats not a problem, just include it in the price.
You can get back to me on: custom27@optushome.com

Cheers,
Happy Easter.

sweetgem · tinkerer Joined: 21 Apr 2002 Posts: 68

yeah mate, very interested in the side draft webber 45,
email us ya details and ill give ya a call, simple..
take it easy.
Dale,

chickenchopper@hotmail.com

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

Check your email.

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

Check your email.

td gem now tg gem · tinkerer Joined: 21 Nov 2002 Posts: 82

gday mate.
just wondering a rough price for twin side or down draft weebers and a manifold to suit a g180 sohc.
cheers
dave

PinkBitz · petrol head Joined: 13 Apr 2002 Posts: 1594

hi just wonderin if you rejet the carbys?

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

I will jet the carb to try and suit whatever combo you have.

Ben Wight · backyard mechanic Joined: 04 Oct 2001 Posts: 946

I have a pair dellorto DHLA 40mm side draughts for $300. No manifold.